Is an innovative leader in the developing and manufacturing of Industrial & Agricultural new materials and molecular sieve series products
The benefits are clear for the oxygen concentrator producer as well as patient comfort as the units require less molecular sieve material for the same output and are thus lighter and easier for the patient to move around.
Attaplulgite clay is a water-bearing magnesium-aluminum silicate, a type of clay mineral. Attaplulgite clay is widely used in many fields such as chemical, metallurgy, building materials, medicine, agriculture, energy, environment and biology.
Zeolites have found widespread applications in many different areas. As a Zeolites supplier, I will share it with you.
A molecular sieve is a porous material with very small, uniformly sized pores. It works similarly to a kitchen sieve, except that it separates a gas mixture containing multi-sized molecules on a molecular scale.
Desiccant is a substance that absorbs water. It is most commonly used to remove humidity that would normally degrade or even destroy products sensitive to moisture.
a) 13X series molecular sieve has the characteristics of higher N2 adsorption capacity, high nitrogen with oxygen selectivity and easy desorption etc. b) 13X series molecular sieve has good wear resistance and longer service life. c) 13X series molecular sieve has high cost performance.
13X series oxygen enrichment molecular sieve are new X type molecular sieve specialized in PSA oxygen generator plant for oxygen producing with high nitrogen adsorption capacity and nitrogen/oxygen selectivity. They are the substitute of 5A (CaA) type molecular sieve.
Our rapid absorption solution can satisfy the wide needs of air separation across numerous industrial production.
The PSA process works at basically constant temperature and uses the effect of alternating pressure and partial pressure to perform adsorption and desorption. Since heating or cooling is not required, short cycles within the range of minutes are achieved. The PSA process consequently allows the economical removal of large amounts of impurities.
The principle of PSA-pressure swing adsorption hydrogen production is to use adsorbents to easily adsorb high-boiling components under the same pressure, but not easy to adsorb low-boiling components.
The term "molecular sieve Desiccant dryer" refers to a broad class of dryers. Other terms commonly used are Regenerative molecular sieve Desiccant Dryers and Twin Tower Dryers, and to a lesser extent Absorption Dryers.
While some molecular sieves that remove alcohols and aromatic hydrocarbons use pressure to regenerate the sieve, the molecular sieves that are used for water-adsorption are usually regenerated by heating. For most industrial purposes, these temperatures range from about 250° to 450°F, similar to baking temperature settings for a standard kitchen
Submit your requirement and questions
NEWSLETTER SIGNUP
By subscribing to our mailing list you will always be update with the latest news from us.
We never spam!
About Us
Products
Markets
Cases
News
FAQ
Contact Us
Oxygen Sieve Ltihum
Molecular Sieve 3A
Molecular Sieve 4A
Molecular Sieve 5A
Molecular Sieve 13X
Hydrogen Purification 5A
Oxygen Sieve Sodium
Oxygen Sieve 13XHP
XH-Refrigerant Desiccant
Auto Brake Dessicant
Anti Sagging Agent
Molecular Sieve Binder
Anti Settling Agent
Inorganic Gel thickener
Bleach Earth
Suspension Agent
Magnesium Aluminum Silicate
Suspension Thixotropic Agent
Thickener
Thixotropic Agent
ZSM5 Moleuclar Sieve
CaX Moleuclar Sieve
USY Moleuclar Sieve
CaY Moleuclar Sieve
VOC Adsorbent
NaY Moleuclar Sieve
AgX Moleuclar Sieve
Activated Alumina
LiLSX Moleuclar Sieve
Copyright © Mingguang Feizhou new materials Co., Ltd. All Rights Reserved. | Sitemap | Technical Support:
