Molecular Sieve 13X Zeolite Dimethyl Ether Removal Ammonia Synthesis Gas Drying Desiccant As Drying Agent

Molecular Sieve 13X

Molecular sieve 13X is a sodium alkali aluminosilicate has an effective pore size of 10 Angstrom and can adsorb molecules less than 10 Angstrom. It can be used in:

Dehydration and desulfurization of natural gas, liquefied petroleum gas and liquid alkanes (propane, butane, etc.).

Purification of gas, removal of H2O, CO2 and hydrocarbon in air separation unit;

Deep drying of general gases (such as compressed air, permanent gas).

Drying and purification of ammonia synthesis gas.

Desulfurization and deodorization of aerosol propellant.

CO2 removal from cracking gas.

Inquire Now Next Product

PRODUCTS DESCRIPTION

Product description:

Molecular Sieve 13X is made from zeolite powder 13X (>70%) and binder. Molecular sieve 13X is can adsorb aromatics and branched-chain hydrocarbons. Molecular sieve 13X is commonly used in removal of mercaptans, removal of CO2 in cryogenic air separation, etc.

Molecular Sieve 13X Zeolite Dimethyl Ether Removal Ammonia Synthesis Gas Drying 13X Molecular Sieve Desiccant As Drying Agent

More Details:

Synonym: Zeolite 13X, Molsive 13X, 13X molecular sieve, 13X-APG

Typical Chemical Formula: Na86[(AlO2)86(SiO2)106].nH2O

CAS NO.: 1318-02-1

Silica-alumina ratio: SiO2/ Al2O3≈2.4

Application:

1. Molecular sieve 13X is used in removal of CO2 and moisture from air (air pre-purification) and other gases

2. Molecular sieve 13X is used in separation of enriched oxygen from air

3. Molecular sieve 13X is used in removal of mercaptans and hydrpogen sulphide from hydrocarbon liquid streams such as LPG, butane, propane etc

4. Molecular sieve 13X is used in removal of n-chained compositions from aromatics

Molecular Sieve 13X Zeolite Dimethyl Ether Removal Ammonia Synthesis Gas Drying 13X Molecular Sieve Desiccant As Drying Agent Storage:

Keep 13X Molecular Sieve in an air tight container until ready for use to avoid unintended moisture adsorption.

Regeneration&Activation:

Molecular sieve 13X can be regenerated either thermal regeneration method(Thermal Swing Adsorption, TSA); To remove moisture from a 13X molecular sieve, a temperature of 200-230℃ (390-570°F) is required. Molecular sieve 13X can also be regnerated by lowering the pressure in the case of pressure swing processes (PSA). A properly regenerated molecular sieve can give moisture dew points below -100℃. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Packing

Package Type	Container Load Capacity		Delivery time	Quality Insurance
	20 GP	40 GP
Steel drum, 150kg/drum	12000 kg	24000 kg	Within 1 week	Chinese National Standard; Offer quality assurance as request.
Paper drum, 25kg/drum	9000 kg	18000 kg
Paper box, 25kg/box	13500 kg	27000 kg

Molecular Sieve 13X Zeolite Dimethyl Ether Removal Ammonia Synthesis Gas Drying 13X Molecular Sieve Desiccant As Drying Agent